 have developed a unique, fully tested Penetration Management system. The Collar and Collaroll are suitable for situations where penetrations or multiple penetrations pass through the Barrier. If these penetrations were not “sealed-off”, fire and smoke would easily pass through the gaps made by the pipes, electric cables, cable trays etc. etc. |
The collars and collarolls have a flange attached, which when installed correctly, sits flush up against the barrier providing a complete seal. The individual Collar is supplied 1 metre in length x 300mm depth x 90mm flange, this collar is suitable for penetrations of up to 300mm diameter.
The Collaroll is supplied 10 metres in length x 300mm depth x 90 mm flange, this roll is suitable for multiple penetrations, and is more cost effective to use, as there is very little wastage because the collars can be cut to the exact size required. |
 |
Both products are Green in colour and are not supplied in any other colour.
To install the collar:
 | wrap around the penetration, bringing the edges together and staple tightly at 100mm centres using 8mm staples. |
| Using 2 x 6mm (approx) beads of High Temperature Adhesive attach the flange flush to the barrier |
| Seal any visible gaps with the Adhesive |
If possible staple to the butt and pleat joint using a single 12 mm staple.
Cable Trays and I Beam
Before collaring, fully pack Cable Tray or I Beam with PLUS offcuts or Shields or any fully tested proprietory fire stopping product.
Special Situation with Multiple Penetrations
| Form a frame around the penetrations using 50mm x 0.5mm stud, fixed to the structure using suitable fasteners applicable to site conditions |
| Using proprietary products, which are fully tested, secure the voids within and around the penetrations |
| Fix barrier to the stud, ensuring a 100mm overlap and treat as a perimeter fixing |
All product and installation details are available from the download section of this website |
|
